main
main-3
main-2

A Career With Doshin Rubber

 

Email submission your CV to Ms Pua : doshin_admin1@kossan.com.my

Job description will prompt up after click to see.

Vacant Position Department Level Job Description Vacancies
Production Engineer Production Executive View Details 1
Production Executive Production Executive View Details 1
Production Supervisor Production Supervisor View Details 1
Assistant Production Manager Production Manager View Details 1
Process Engineer Production Executive View Details 2
QA Executive QA Executive View Details 1
QA Assistant Manager QA Manager View Details 1
Lab Executive Lab Executive View Details 1
E-Lab Engineer Lab Executive View Details 3

Doshin Rubber Products (M) Sdn. Bhd.

198401001871 (114386-H)

Lot PT 34252, Jalan Sekolah
Rantau Panjang, 42100 Klang
Selangor Darul Ehsan, Malaysia.

PHONE
603-3290 5619 / 603-3290 5621

EMAIL
doshin@kossan.com.my

E-Lab Testing & Research Center

Production Engineer
a) Establish and enforce new SOP’s
b) Modify, monitor and enforce existing SOP’s
c) Work closely and assist to improve Production system and functions.
d) Evaluate and improve on processes in manufacturing systems.
e) Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers.
f) Develop innovative solutions.
g) Improve process capability and production volume while maintaining and improving quality standards.
h) Prepare samples for study.
i) Perform shrinkage and strength testing.
j) Collect, record and transcribe data.
k) Show results in reports.
l) Develop and implement systems that optimized all phases of production process.
m) Provide suggestions during incident investigations.
n) Advise on corrective actions.
o) Ensure projects are completed on time.
p) Any other assignment/duties given from time to time.

Production Executive
a) To ensure the efficient operations in the production lines are in accordance with the production target.
b) To give guidance to workers in order to ensure work is carried out efficiently and accordingly to the requirement.
c) To ensure that Good Manufacturing Practice and Good Housekeeping Procedure are carried out all the times.
d) To maintain Safety & Health Policies in accordance with the company practices.
e) To provide technical support and help for fenders & bearings testing.
f) Any other assignment/duties given by Assistant Production Manager or any other higher authorized personnel from time to time.

Production Supervisor
a) Supervise Production
b) Manpower arrangement
c) Ensure daily orders completion
d) Supervise leaders

Assistant Production Manager
a) To ensure the efficient operations in the production lines are in accordance with the production target.
c) To give guidance to workers in order to ensure work is carried out efficiently and accordingly to the requirement.
d) To ensure that Good Manufacturing Practice and Good Housekeeping Procedure are carried out all the times.
e) To maintain Safety & Health Policies in accordance with the company practices.
f) To provide technical support and help for fenders & bearings testing.
g) Any other assignment/duties given by Factory Manager or any other higher authorized personnel from time to time.

Process Engineer
a) Establish and enforce new SOP’s
b) Modify, monitor and enforce existing SOP’s
c) Work closely and assist to improve Production system and functions.
d) Evaluate and improve on processes in manufacturing systems.
e) Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers.
f) Develop innovative solutions.
g) Improve process capability and production volume while maintaining and improving quality standards.
h) Prepare samples for study.
i) Perform shrinkage and strength testing.
j) Collect, record and transcribe data.
k) Show results in reports.
l) Develop and implement systems that optimized all phases of production process.
m) Provide suggestions during incident investigations.
n) Advise on corrective actions.
o) Ensure projects are completed on time.
p) Any other assignment/duties given from time to time.

QA Executive
a) Arrange and coordinate incoming and outgoing inspection on day to day basic.
b) Assisting all related departments Managers in control, preparation and review of the quality procedures and standards.
c) Follow up and investigate with production on the Customer Complaint reports to ensure the investigation is done accordingly and feedback to Customer Service promptly. If the situation allowed, need to visit the customer’s premises.
d) Verify the Preventive / Corrective Action Request (PCAR) on the status and close the PCAR report when necessary evidence is verified. (PCAR will be raised due to Customer Complaint, Compound Returned, Goods Returned, High Internal Rejections, and Repetitive of same problems or non-conformance noted during IQA).
e) Oversee incoming and outgoing inspections.
f) Any other assignments/duties given by the Top Management or any other higher authorized personnel from time to time.

QA Assistant Manager
a) Maintain, implement and further improve on the company’s Quality Management System (QMS) as per ISO 9001 requirements and to manage the implementation together with other personnel in the company.
b) To assist in conducting Management Review Meetings according to the requirement.
c) To assist in carry out Internal Quality Audit in the company under the scope of registration of the QMS.
d) To ensure work instructions/procedures at Production floor and relevant departments is adhere to and update accordingly.
e) Ensure the integrity of the management system is well maintain when changes to the management system are planned and implemented.
f) Maintain ISO/IEC 17025 Doshin E Laboratory and coordinate with the Technical Team together with the personnel in Laboratory.
g) To handle third party inspection when necessary.
h) Assisting all related Department Managers in control, preparation and review of quality procedures and standards.
i) Follow up and investigate with production on Customer Complaint reports to ensure the investigation is done accordingly and feedback to Customer Service promptly. If the situation requires, visit the customer’s premises.
j) To handle issuance of preventive/correction request (PCAR), verify on the status and close the PCAR reports when necessary evidence is verified. (PCAR) will be raised due to Repetitive of same problems or non-conformance noted during IQA.
k) Ensure the effectiveness of the actions taken (as in no. 10) by having a good monitoring and verification method periodically.
l) To monitor on inspections of Production Processes and ensure its implementation is carry out accordingly.
m) To provide necessary training on quality/improvements when necessary.
n) Any other assignments/duties given by the Top Management or any other higher authorized personnel from time to time.

Lab Executive
a) Monitoring & planning testing for all projects under Material Testing Laboratory.
b) Oversee daily coordination of work with production.
c) Work closely with Production and RnD for material quality control.
d) Prepare and verify material test report as per standard/ customer requirement.
e) Prepare and complying of laboratory work as per ISO 9001 and ISO/IEC 17025:2005.
f) Ensuring of all measuring equipment and instruments used in the production floor and laboratory are in good order and calibrated periodically.
g) Any other assignments/duties given by the HOD or Management from time to time.
h) Assist HoD on admin and documentation work.
i) Safekeeping and storage of data.

E-Lab Engineer
a) Involve in day to day activities at Bearing Lab and ensure all testing carries out are in line with full compliance to customers requirement and ISO/IEC 17025:2005 requirement. This includes product dimensional checks.
b) Manage witness test and test demo (in house).
c) Authorized to give opinion and interpretations on all testing and test method with Bearing Lab operation and ISO/IEC 17025:2005 scope.
d) Calibration of all plant wide measuring equipment and report preparation and also to liaison with external calibration centers for calibration arrangements/coordination.
e) Process/Product Improvement (Project basis).
f) Supervise Technical/Lab assistant on daily lab activities.
g) To calculate and workout MOU (Measurement of uncertainty for ISO/IEC 17025) for related test under the coverage.
h) To involve as an Internal Auditor for company Quality Management System (ISO 9001 & ISO/IEC 17025).
i) Any other assignments/duties given by the Director or any other higher authorized personnel from time to time.